Ha tabi illa python olsun istiyosan django ile de bir şeyler yapabilirsin  Ama php ile çok daha fazla kaynak bulabilirsin, python'a göre web platformunda daha çok yaygın olduğundan Türkçe kaynak sıkıntısı da pek çekeceğini düşünmüyorum.
Yeni Üye
Üyelik Tarihi: 09-07-2017
Yorum Sayısı: 30
Konu Sayısı: 0
Rep Puanı:
0
gecemor python olsun c olsun c++ olsun ayni seviyede biliyorum zaten bu dilleri de benimki dil fanatikligi degil sen biraz yanlis anladin. cross-platform icin suan en iyi secenek appcelerator titanium frameworku (js ile hem android hem ios uygulama yaziyorsun ve diger seceneklere gore hem esnek hem stabil hem estetik) ve o bile kucucuk bir is yapacak programi 10-20 mb yapiyor, ram kullanimina hic girmiyorum. o yuzden temiz bir is yapilacaksa android icin en uygun dil java yada kotlin, ios icin objective-c diyorum. diger konulardaki yorumlarinda gordum php html js falan biliyorsun gerektigi yerde onlari kullanmissin, bu da ayni oyle bisey
Ya tabiki de eğer android programlama ön planda olacaksa dediğin gibi bir java'dan başlamak daha mantıklı, ama ben de onun android uygulamayı siteye alternatif olsun diye yapmak istediğini düşünerek söyledim. Benim mesela C, C++ ve Java ile hiç işim olmadı, kim bilir bir gün ciddi anlamda bir proje çıkar karşıma ve ihtiyaç duyup öğrenirim, ama şu an sadece hobi veya iş görsün yeter kafasındayım  Yaşım 34, eğer 24 falan olupda bu şekilde işin içine girseydim o zaman tabi ciddi anlamda bunu geliştirmeyi, gittiği yere kadar gitmek isterdim, bi yerde de nasip işte
Yeni Üye
Üyelik Tarihi: 09-07-2017
Yorum Sayısı: 30
Konu Sayısı: 0
Rep Puanı:
0
anladim, nasip evet. bu yas durumundan haberim yoktu kusrumuz olduysa affet
yoo estağfurullah, sıkıntı yok  Bir de 2 yıl öncesine kadar programlama dili ile alakam yoktu, keşke daha erken yaşlarda imkan olsaydı da başlasaydım.
Yeni Üye
Üyelik Tarihi: 09-07-2017
Yorum Sayısı: 30
Konu Sayısı: 0
Rep Puanı:
0
gec olsun guc olmasin
Kıdemli Üye
  
Üyelik Tarihi: 03-02-2016
Yorum Sayısı: 195
Konu Sayısı: 9
Rep Puanı:
2
Java da biliyorum c de az da assembly var ama profesyonel değilim benim de konseptlerde eksiğim var o yüzden (Computer Networks [Andrew S. Tanenbaum]) okuyorum şaka olsun diye yazdım yanlış anlaşılmasın
Yeni Üye
Üyelik Tarihi: 02-07-2017
Yorum Sayısı: 43
Konu Sayısı: 0
Rep Puanı:
0
Tekrar teşekkürler. Madem yaşlar ortaya çıktı benimde 37. Belli bi zamandan sonra insan ağır kodları kaldıramıyor. Bilindik tanıdık kodlar üzerinden gitmek sarıyor beni de. Yıllar önce python varmışta hiç ilgilenmemişim. C ile başladım. Bi merhaba dünya kodunda python ile farkına baktım hemen kalsın dedim C. Söylediklerinizi dikkate alarak, işler izin verirse boş vakitte halledeceğim bi şekilde 
Bu arada kodları mysql'e çevirip siteyi de php yapacağım. Aynı mysql veri tabanı üzerinden çalışırlar mı merak ediyorum. Aynı anda çalışınca birbirlerini kitlemezse güzel olur.
22-07-2017, Saat: 19:27
(Son Düzenleme: 22-07-2017, Saat: 19:28, Düzenleyen: gecemor.)
mysql ile php arasında bi sıkıntı olacağını sanmıyorum hocam, çünkü bu forumun mybb scripti ve php ile mysql üzerinden çalışıyor  Dediğim gibi eğer projeye başlamak nasip olursa çok bilmesem de ben de php üzerinden fikirler sunabilirim. Tabi daha iyi bilen arkadaşlar da yardımcı olacaktır. İyi çalışmalar dilerim...
Yeni Üye
Üyelik Tarihi: 02-07-2017
Yorum Sayısı: 43
Konu Sayısı: 0
Rep Puanı:
0
Teşekkürler. Php'de tek sorunum php bölümünüzde yazdığım gibi php header yönlendirme sorunu. Php bölümünde bu sorunu bilen çıkmadı belkide. yanıtlanmadı o sorum.  Her hostingte çalışmıyor php header. Neyse olmadı bu sorunu çıkartmayan hostingimde kullanacağım artık.
Uygulamada video ve sesi birlikte kaydedecek bir kod arıyordum.
Aşağıdaki bulduğum kod video ve sesi birleştirip kaydediyor.
Bu kod dosyayı bulunduğu yere kaydediyor. Bu işlem bittikten sonra sunucu yazılımı çalışacak belirtilen video ismi aynı olduğundan dosyayı görüp transfere başlayacak değil mi?
Eş zamanlı sunucuya kaydetmem gerekmez mi yoksa adam video kayıt yaptıktan sonra uygulamayı kapattığında transferde sonlanmaz mı ?
biraz karışık geldi kodları. Başka benzer daha basit bir kod var mı sizde ? open cv olması şart değil.
PHP Kod:
import cv2 import pyaudio import wave import threading import time import subprocess import os
class VideoRecorder():
# Video class based on openCV def __init__(self):
self.open = True self.device_index = 0 self.fps = 6 # fps should be the minimum constant rate at which the camera can self.fourcc = "MJPG" # capture images (with no decrease in speed over time; testing is required) self.frameSize = (640,480) # video formats and sizes also depend and vary according to the camera used self.video_filename = "temp_video.avi" self.video_cap = cv2.VideoCapture(self.device_index) self.video_writer = cv2.VideoWriter_fourcc(*self.fourcc) self.video_out = cv2.VideoWriter(self.video_filename, self.video_writer, self.fps, self.frameSize) self.frame_counts = 1 self.start_time = time.time()
# Video starts being recorded def record(self):
# counter = 1 timer_start = time.time() timer_current = 0
while(self.open==True): ret, video_frame = self.video_cap.read() if (ret==True):
self.video_out.write(video_frame) # print str(counter) + " " + str(self.frame_counts) + " frames written " + str(timer_current) self.frame_counts += 1 # counter += 1 # timer_current = time.time() - timer_start time.sleep(0.16) # gray = cv2.cvtColor(video_frame, cv2.COLOR_BGR2GRAY) # cv2.imshow('video_frame', gray) # cv2.waitKey(1) else: break
# 0.16 delay -> 6 fps #
# Finishes the video recording therefore the thread too def stop(self):
if self.open==True:
self.open=False self.video_out.release() self.video_cap.release() cv2.destroyAllWindows()
else: pass
# Launches the video recording function using a thread def start(self): video_thread = threading.Thread(target=self.record) video_thread.start()
class AudioRecorder():
# Audio class based on pyAudio and Wave def __init__(self):
self.open = True self.rate = 44100 self.frames_per_buffer = 1024 self.channels = 2 self.format = pyaudio.paInt16 self.audio_filename = "temp_audio.wav" self.audio = pyaudio.PyAudio() self.stream = self.audio.open(format=self.format, channels=self.channels, rate=self.rate, input=True, frames_per_buffer = self.frames_per_buffer) self.audio_frames = []
# Audio starts being recorded def record(self):
self.stream.start_stream() while(self.open == True): data = self.stream.read(self.frames_per_buffer) self.audio_frames.append(data) if self.open==False: break
# Finishes the audio recording therefore the thread too def stop(self):
if self.open==True: self.open = False self.stream.stop_stream() self.stream.close() self.audio.terminate()
waveFile = wave.open(self.audio_filename, 'wb') waveFile.setnchannels(self.channels) waveFile.setsampwidth(self.audio.get_sample_size(self.format)) waveFile.setframerate(self.rate) waveFile.writeframes(b''.join(self.audio_frames)) waveFile.close()
pass
# Launches the audio recording function using a thread def start(self): audio_thread = threading.Thread(target=self.record) audio_thread.start()
def start_AVrecording(filename):
global video_thread global audio_thread
video_thread = VideoRecorder() audio_thread = AudioRecorder()
audio_thread.start() video_thread.start()
return filename
def start_video_recording(filename):
global video_thread
video_thread = VideoRecorder() video_thread.start()
return filename
def start_audio_recording(filename):
global audio_thread
audio_thread = AudioRecorder() audio_thread.start()
return filename
def stop_AVrecording(filename):
audio_thread.stop() frame_counts = video_thread.frame_counts elapsed_time = time.time() - video_thread.start_time recorded_fps = frame_counts / elapsed_time print "total frames " + str(frame_counts) print "elapsed time " + str(elapsed_time) print "recorded fps " + str(recorded_fps) video_thread.stop()
# Makes sure the threads have finished while threading.active_count() > 1: time.sleep(1)
# Merging audio and video signal
if abs(recorded_fps - 6) >= 0.01: # If the fps rate was higher/lower than expected, re-encode it to the expected
print "Re-encoding" cmd = "ffmpeg -r " + str(recorded_fps) + " -i temp_video.avi -pix_fmt yuv420p -r 6 temp_video2.avi" subprocess.call(cmd, shell=True)
print "Muxing" cmd = "ffmpeg -ac 2 -channel_layout stereo -i temp_audio.wav -i temp_video2.avi -pix_fmt yuv420p " + filename + ".avi" subprocess.call(cmd, shell=True)
else:
print "Normal recording\nMuxing" cmd = "ffmpeg -ac 2 -channel_layout stereo -i temp_audio.wav -i temp_video.avi -pix_fmt yuv420p " + filename + ".avi" subprocess.call(cmd, shell=True)
print ".."
# Required and wanted processing of final files def file_manager(filename):
local_path = os.getcwd()
if os.path.exists(str(local_path) + "/temp_audio.wav"): os.remove(str(local_path) + "/temp_audio.wav")
if os.path.exists(str(local_path) + "/temp_video.avi"): os.remove(str(local_path) + "/temp_video.avi")
if os.path.exists(str(local_path) + "/temp_video2.avi"): os.remove(str(local_path) + "/temp_video2.avi")
if os.path.exists(str(local_path) + "/" + filename + ".avi"): os.remove(str(local_path) + "/" + filename + ".avi")
Bu da server kodu :
PHP Kod:
#!/usr/bin/python # Import all from module socket from socket import * #Importing all from thread from thread import * # Defining server address and port host = 'localhost' #'localhost' or '127.0.0.1' or '' are all same port = 1026 #Use port > 1024, below it all are reserved #Creating socket object sock = socket() #Binding socket to a address. bind() takes tuple of host and port. sock.bind((host, port)) #Listening at the address sock.listen(5) #5 denotes the number of clients can queue def clientthread(conn): #infinite loop so that function do not terminate and thread do not end. #Sending message to connected client conn.send('Merhaba Ben Server\n') #send only takes string #Receiving from client data = conn.recv(1024) # 1024 stands for bytes of data to be received print data while True: #Accepting incoming connections conn, addr = sock.accept() #Creating new thread. Calling clientthread function for this function and passing conn as argument. start_new_thread(clientthread,(conn,)) #start new thread takes 1st argument as a function name to be run, second is the tuple of arguments to the function. conn.close() sock.close()
|